◆Applications◆
Dehydration of spent grain, juice lee's, tea lees, etc.
We convert spent grain from craft beer or craft whisky production, remaining after the mashing process used to extract the wort required for fermentation into livestock feed, supporting the realization of a circular society.
◆Ability◆
90～120㎏/H
◆Features◆
1) Quiet operation
2) Easy maintenance
3) High-efficiency dewatering
4) Suitable for chemical immersion cleaning
5) Low-profile, compact design
Spent grain can be fed directly from the lauter tun or mash tun of a craft brewery or craft whisky distillery into the dehydrator for processing.

Adopts a diamond chip grinding wheels.
◆Applications◆
Grinding of food ingredients such as soybeans, carrots, plant sprouts, etc.
◆Features◆
1) It is hygienic as there is no water penetration. Chemical solution circulation cleaning is also possible.
2) The risk of issues such as screen damage in subsequent processes caused by the detachment of abrasive grains has been reduced.
3) Easy to attach and detach the grinding wheels. The seals can also be easily replaced.
4) Easy sliding adjustment ⇒ Gap adjustment of 0.01 mm per full turn of the handle.

◆Applications◆
Dehydration of spent grain, juice lee's, tea lees, etc.
We convert spent grain from craft beer or craft whisky production, remaining after the mashing process used to extract the wort required for fermentation into livestock feed, supporting the realization of a circular society.
◆Ability◆
150～250㎏/H
◆Features◆
1) Quiet operation
2) Easy maintenance
3) High-efficiency dewatering
4) Suitable for chemical immersion cleaning
5) Compact design

◆Applications◆
Dehydration of spent grain from beer or whisky production, juice lee's, tea lees, etc.
◆Ability◆
0.8–1.3 m³/h
◆Features◆
1) Pressure regulation system: Issues such as co-rotation and excessive squeezing, which are common in screw press dehydrators, have been resolved.
2) High-efficiency dewatering: It is now possible to achieve high dewatering rates that were previously considered unattainable with conventional screw press dehydrators.

◆Applications◆
Dehydration of spent grain, juice lee's, tea lees, etc.
◆Ability◆
MTS210-3 (3-unit system) 2.4–3.9 m³/h
MTS210-9 (9-unit system) 7.2–11.7 m³/h
◆Features◆
1) Processing capacity is proportional to the number of screw stations, so you can reliably calculate the required number of stations just by testing a single-unit screw press dehydrator.
2) The installation area is less than half that of a conventional screw press dehydrator with the same processing capacity.
3) Equipped with a pressure adjustment device, it is possible to obtain high dehydration rates—previously considered impossible with conventional screw press dehydrators.